Wheel Spinner, 2 eared, plain, 12 TPI, RH

All our MWS centre lock wheel spinners are made from the highest quality materials and are precision engineered to ensure an accurate fit.

These plain two eared spinners are 12 TPI (threads per inch) and fit 42mm hubs.

Two eared spinners can be fitted with a hammer or spanner. A spinner should be fitted with the wheel jacked up off the ground, so that the hub, wheel and spinner are all centralised. Apply the spinner by hand and tighten 3 to 3 ½ turns, give the spinner a couple of taps with a hammer, lower the wheel to the ground and give the spinner a couple of more taps. As long as the hubs are fitted correctly, then the spinner will self tighten and lock as the car is driving.

Please check local regulations for eared spinners.

If you need technical help, buying advice, or simply need to know more about our wire wheels or wire wheel and tyre packages, please email Contact Us.