Interior Trim Kits - TR2-4A

Trim Kits - TR2
This kit comprises door panels with rectangular pocket apertures, and a piercing at the rear end of the door to take the door opening mechanism. The rear quarter panels are not piped, the rear wheel arches are piped in the same colour as the trim kit. The interior rear bulkhead board is a plain piece of fibreboard simply covered with vinyl.

Trim Kits - TR3
The door panels are the same as in the TR2 kit, having a rectangular aperture and a hole in the rear end to take the door opening mechanism. The quarter panels are the same as the TR2, having no piping; however, the rear wheel arches are piped in white unlike the TR2. The interior rear bulkhead is a plain piece of fibreboard but with pressed-in pleats on the material, which is then attached by a simple adhesive to the fibre backing board.

Trim Kits - TR3A (to TS60000)
The door panel for this trim kit has a kidney shaped aperture with no hole at the rear end for the door opening. The door was opened by a cable which was accessed through the kidney shaped aperture. The door panel was white piped, and had squared lower corners. The rear quarter panel was white piped, as was the rear wheel arch. The tank board was fibre covered in an assembly of sewn panels. The effect of these sewn panels was to mimic the later available technology of heat formed ultra-sonic-welding which puts pleats in the material.

Trim Kits - TR3A (TS60001 on)
The door board had the same shaped aperture as the earlier TR3A specific-action, but the lower rear corner was rounded to match with the door, which at this stage had been changed to an all metal pressing, as opposed to a part wooden assembly. The rear quarter panel was the same, as the earlier TR3A with white piping, but the rear wheel arch cover - which was also white piped as the earlier specification, had a different contour to allow for the changed rear floor construction in the post TS60001 cars. The tank board was a fibreboard covered with an ultra-sonically welded pattern in the vinyl.

Trim Kits - TR4 (Soft Top Models)
In clarification this should really be called non-surrey top models, because the surrey soft top is not covered by this specification. The factory called cars not fitted with surrey tops - soft tops, and we will follow that terminology here. The TR4 had a somewhat interesting arrangement in the rear cockpit, when the hood is not being used to protect you from the elements, it is taken off the frame and stored in the boot of the car, this is exactly the arrangement used by most sports cars of the period, including TR2/3/3A. This leaves the frame on the car, which is then folded down, and frankly, looks quite ugly. On the TR3 there is actually a hood frame stowage cover, but on the TR4 - rather ingeniously - the hood frame stowage cover becomes part of the interior trim, and forms a kind of mini-armchair with two sides and a back provided with thick padding, to allow rear passengers to sit behind the driver and front seat passenger in comfort! The interior trim kit therefore comprises a pair of door panels, white piped, a pair of quarter panels, white piped, a pair of rear wheel arch covers, white piped, loose material to cover the inner rear wing, behind the B post, and the triangular covers for the B post lower reinforcing gussets, as well as the three pieces across the back of the car to provide the hood stowage cover. The only items needed to complete the interior trimming of a TR4 soft top model are the front seat covers and the rear seat cushion cover.

Trim Kits - TR4 (Surrey Top Models)
The interior trim kit, for TR4s fitted with a surrey top, has a pair of door panels, white piped, a pair of rear quarter panels, white piped, and a pair of rear wheel arch covers, white piped, we also supply a tank board with vertical heat formed bars, similar to the TR5/6 models. We are not exactly sure if this tank board is correct, so for the moment we will list separate part numbers for TR4 & TR4A kits, though, ultimately you will receive the same item from us whichever you order. Our research will continue into this matter and if we find there is a difference in the surrey top TR4 trim kits, we will adjust the contents accordingly, and supply them as distinct from the TR4A kits. The kits also include two strips of vinyl to cover the inner rear wing, behind the B post, and two triangular boards that cover the reinforcing gusset at the bottom of the B post - where it joins the sill. The only items needed to complete the interior trimming of a TR4 surrey top model are the front seat covers and the rear seat cushion cover.

Trim Kits - TR4A
This trim kit comprises; a pair of door panels, white piped, a pair of rear quarter panels, white piped, a pair of rear wheel arch covers, white piped, a tank board with vertical heat formed pleated pattern, not piped, loose material to cover the inner rear wing, behind the B post, and two triangular boards that cover the reinforcing gusset at the bottom of the B post - where it joins the sill. The only items needed to complete the interior trimming of your TR4A are the front seat covers and the rear seat cushion cover.