E-Zorb Fuel Treatment

If you haven't pre-treated with E-Xtend, and you've found water in your fuel in your tank, you can use E-Zorb to totally emulsify the water-ethanol layer that formed at the bottom of your gas tank.
The water and ethanol will mix back into the rest of the fuel in the tank.
The water will pass with the petrol through the finest filters and go through the engine, finally leaving as steam.
E-Zorb should be mixed in the ratio 1 ounce to 20 gallons of gasoline with ethanol.
That means the one pint (16 oz.) bottle will treat 320 gallons.
It will be necessary to agitate the fuel in the tank by rocking the car from side to side and bouncing it up and down.