SPEEDOMETER, MPH, (SN6411/04), 3.45:1 rear axle, reconditioned/exchange
Part Number: 218831R
Notes: Pi models were originally fitted with axles that had a 3.45:1 ratio and mated with 165 section tyres. Carburettor models were fitted with a 3.7:1 axle ratio & 185 section tyres. Both parameters need to be correct to obtain an accurate speedo reading.... See more
SPEEDOMETER, KPH, (SN6411/05), 3.45:1 rear axle, reconditioned/exchange
Part Number: 218832R
Notes: Pi models were originally fitted with axles that had a 3.45:1 ratio and mated with 165 section tyres. Carburettor models were fitted with a 3.7:1 axle ratio & 185 section tyres. Both parameters need to be correct to obtain an accurate speedo reading.... See more
SPEEDOMETER, KPH, (SN6411/09), 3.45:1 rear axle, reconditioned/exchange
Part Number: TKC2139R
Application: Australia
Notes: Pi models were originally fitted with axles that had a 3.45:1 ratio and mated with 165 section tyres. Carburettor models were fitted with a 3.7:1 axle ratio & 185 section tyres. Both parameters need to be correct to obtain an accurate speedo reading.... See more
SPEEDOMETER, MPH, (SN6411/06), 3.7:1 rear axle, reconditioned/exchange
Part Number: 218827R
Notes: Pi models were originally fitted with axles that had a 3.45:1 ratio and mated with 165 section tyres. Carburettor models were fitted with a 3.7:1 axle ratio & 185 section tyres. Both parameters need to be correct to obtain an accurate speedo reading.... See more
SPEEDOMETER, MPH, (SN6411/11), 3.7:1 rear axle, reconditioned/exchange
Part Number: TKC2426R
Notes: Pi models were originally fitted with axles that had a 3.45:1 ratio and mated with 165 section tyres. Carburettor models were fitted with a 3.7:1 axle ratio & 185 section tyres. Both parameters need to be correct to obtain an accurate speedo reading.... See more
SPEEDOMETER, KPH, (SN6411/07), 3.7:1 rear axle, reconditioned/exchange
Part Number: 218828R
Notes: Pi models were originally fitted with axles that had a 3.45:1 ratio and mated with 165 section tyres. Carburettor models were fitted with a 3.7:1 axle ratio & 185 section tyres. Both parameters need to be correct to obtain an accurate speedo reading.... See more
Regular Price: £18.30
Special Price £14.64
Regular Price: £18.60
Special Price £14.88
Regular Price: £20.00
Special Price £16.01
CLIP, cable to chassis
Part Number: 148820
Application: LHD, without overdrive
Regular Price: £14.69
Special Price £12.48
Regular Price: £15.79
Special Price £13.43
Regular Price: £18.40
Special Price £14.71
SENDER UNIT, water temperature
Part Number: GTR108
Notes: Screwed into thermostat and water pump housing
Regular Price: £8.39
Special Price £6.71
PIPE, nylon, oil pressure, engine to gauge
Part Number: 149867
Application: Pi models
PIPE, nylon, oil pressure, engine to gauge
Part Number: 138308
Application: Carburettor models
Regular Price: £6.89
Special Price £5.51
SWITCH, rheostat, illumination lights
Part Number: BHA4278
Application: North American
CHOKE CABLE, written type knob
Part Number: 219258
Application: European from (c) CR1
Regular Price: £90.00
Special Price £76.50
CHOKE CABLE, pictorial type knob
Part Number: 218301
Application: North American to (c) CF12500
Regular Price: £90.00
Special Price £76.50
CHOKE CABLE, pictorial type knob
Part Number: UKC2121
Application: North American from (c) CF12501
Regular Price: £90.00
Special Price £76.50
COLUMN SWITCH ASSEMBLY, RHD
Part Number: 152616
Application: RHD
Notes: Lighting, headlamp dip main beam & flash
COLUMN SWITCH ASSEMBLY, LHD
Part Number: 148648
Application: LHD
Notes: Lighting, headlamp dip main beam & flash
DASH KNOB SET
Part Number: GKS6008X
Application: From (c) CR1 to (c) CR6701
KNOB, choke, pictorial type
Part Number: 712907
Application: From (c) CR1 to (c) CR6701
KNOB, heater fan, pictorial type
Part Number: 712911
Application: From (c) CR1 to (c) CR6701
KNOB, air distribution, pictorial type
Part Number: 712909
Application: From (c) CR1 to (c) CR6701
KNOB, heater control, pictorial type
Part Number: 712903
Application: From (c) CR1 to (c) CR6701