FUEL TANK

PLUG, drain

Notes: Original tanks only

WASHER, on drain plug

Notes: Original tanks only

Grommet, rubber, 1/2" OD x 1/8" ID

Notes: Alternative

STRAP, tank retaining

SCREW, hex headed, (short)

Notes: Tank strap to chassis

WASHER, locking

STRIP, felt, tank base to body

Notes: The tank base felt strips must be trimmed to suit installation.

STRIP, felt, retaining strap to tank

WASHER, fibre, upper

WASHER, fibre, lower

Notes: Original tanks

BANJO BOLT, fuel tank vent

CLIP

Notes: Vent pipe anti-rattle, and fuel line to chassis.

CAP, fuel filler, screw type

ESCUTCHEON, chromed

WASHER, fibre

EXTENSION, screwed to filler cap

CAP, fuel filler, with tube extension

Notes: Alternative to 704551. If your car is missing the fuel cap, use 613506 (item 18) or 571086 (item 20), regardless of model or chassis number.... See more

GROMMET, in rear deck

Notes: Use with items

CAP, fuel filler, locking

Notes: If your car is missing the fuel cap, use 613506 (item 18) or 571086 (item 20), regardless of model or chassis number.... See more

HOSE, rubber, filler to tank

CLIP, wire type

SENDER UNIT, fuel gauge

GASKET, seating sender unit

SCREW, sender unit to tank

WASHER, locking

UNION, fuel line connecting

GROMMET, fuel line

Notes: Through chassis

TAP ASSEMBLY, fuel

CORK SEAL, in fuel tap

HOSE, stainless steel braided

Notes: Tap to pump union & nuts. Alternative to 34, 35, 36

HOSE, flexible, fuel inlet to pipe

Notes: Alternative to 33. If you have nothing here, use the stainless steel braided pipe (part no. 104842S) to provide a connection between the fuel tap and pump.... See more

PIPE, fuel inlet to pump

Notes: Alternative to 33. If you have nothing here, use the stainless steel braided pipe (part no. 104842S) to provide a connection between the fuel tap and pump.... See more

PIPE, fuel tap outlet

Notes: Alternative to 33. If you have nothing here, use the stainless steel braided pipe (part no. 104842S) to provide a connection between the fuel tap and pump.... See more

FUEL PUMP, replacement

Notes: This comes with a glass bowl and an external priming lever as original.

GAUZE

SPRING, under diaphragm

SCREW, retaining valve plate

REPAIR KIT, fuel pump

Notes: Includes diaphragm, valves & gaskets

GASKET, sediment bowl

GASKET, pump to crankcase

Clip, on pivot

SPRING, priming handle

NUT, pump attachment

WASHER, pump attachment

PIPE, pump to carburettor inlet hose

Notes: Use with 203120

OLIVE

HOSE, flexible with banjos

Notes: This hose is only compatible with carburettors with the banjo type float chamber lid. Carburettor to carburettor.... See more

HOSE, flexible, pipe to front carburettor

Notes: Carburettor to carburettor, compatible with float lids AUC4103 and AUC4104.

PIPE, rigid

Notes: Carburettor to carburettor, compatible with float lids AUC4103 and AUC4104.

HOSE, pipe to carburettors

Notes: Carburettor to carburettor, compatible with float lids AUC4103 and AUC4104.

PIPE, vent, rigid, to float chamber

Notes: Use with AUC carburettors

HOSE, flexible, vent pipes to carburettors

Notes: Use with AUC carburettors

PIPE, fuel, rigid, tank to coupling

Notes: Cut & bend to fit

PIPE, fuel, rigid, coupling to fuel tap

Notes: Cut & bend to fit

Screw, 2BA x 1/2"

Washer, spring, 3/16"

FUEL PIPE KIT, (TR2-3A), cooper, car set

Notes: TR2-3A up to TS15496