ENGINE, (standard bores)
Part Number: 503707R
Application: TR3-3A
Notes: These reconditioned units are supplied on a strict exchange basis.
ENGINE, (standard bores)
Part Number: 514659R
Application: TR4-4A
Notes: These reconditioned units are supplied on a strict exchange basis.
SHORT ENGINE, (87mm bores)
Part Number: ENG1150
Notes: Customers own unit. These are fully balanced units complete with diaphragm clutch & flywheel. Contact Moss for details.... See more
GASKET, water pump to housing
Part Number: 138587
Notes: These gaskets/seal are also included in GEG248 but are not illustrated.
GASKET, oil filter housing
Part Number: 112146
Notes: These gaskets/seal are also included in GEG248 but are not illustrated.
Gasket, figure of 8, liners to block
Part Number: 112789
Notes: These gaskets/seal are also included in GEG248 but are not illustrated.
GASKET, fuel pump
Part Number: 139041
Notes: These gaskets/seal are also included in GEG248 but are not illustrated.
GASKET, timing cover
Part Number: 211122
Notes: These gaskets/seal are also included in GEG248 but are not illustrated.
GASKET, oil pump to block
Part Number: 056282
Notes: These gaskets/seal are also included in GEG248 but are not illustrated.
Stud, cylinder head, 5"
Part Number: 106959
Application: TR2-3 to (c) TS13051
Stud, cylinder head, 9 1/16"
Part Number: 106960
Application: TR2-3 to (c) TS13051
Stud, cylinder head, 5"
Part Number: 106959
Application: TR3-3A, TR4-4A from (c) TS13052
Stud, cylinder head, 5 3/8"
Part Number: 113570
Application: TR3-3A, TR4-4A from (c) TS13052
Notes: To be used when an engine lifting bracket is not fitted.
Stud, cylinder head, 5 9/16"
Part Number: 121734
Application: TR3-3A, TR4-4A from (c) TS13052
Notes: To be used when an engine lifting bracket is fitted.
Stud, cylinder head, 5 3/8"
Part Number: 113570
Application: TR3-3A, TR4-4A from (c) TS13052
Stud, cylinder head, 9 1/16"
Part Number: 106960
Application: TR3-3A, TR4-4A from (c) TS13052
Stud, cylinder head, 9 1/2"
Part Number: 113169
Application: TR3-3A, TR4-4A from (c) TS13052
BOLT, breather pipe to sump & slave cylinder stay
Part Number: BH505101
Notes: With closed circuit breather fitted
Regular Price: £0.49
Special Price £0.40
SUMP, alloy, tapered type plug
Part Number: 301318
Notes: This is a cast alloy internally baffled sump
ENGINE MOUNTING, round
Part Number: 130985
Application: TR4
Notes: These mountings (items 75 & 76) are interchangeable, and either type may be fitted in pairs. However, the 143057 are preferred, as they are of a 'failsafe' design.... See more
ENGINE MOUNTING, rectangular
Part Number: 143057
Application: TR4A
Notes: These mountings (items 75 & 76) are interchangeable, and either type may be fitted in pairs. However, the 143057 are preferred, as they are of a 'failsafe' design.... See more