EXHAUST MANIFOLD, front
Part Number: NPN
Notes: Two different exhaust manifolds were fitted - BN4 from C.E.48863, BN6 and then BN7, BT7, BJ7, BJ8. Both are not available.... See more
EXHAUST MANIFOLD, rear
Part Number: NPN
Notes: Two different exhaust manifolds were fitted - BN4 from C.E.48863, BN6 and then BN7, BT7, BJ7, BJ8. Both are not available.... See more
MANIFOLD, inlet, replacement
Part Number: 021-960
Application: BN4 to BJ8
Notes: The original inlet manifold was a poor design for air and fuel flow and is also becoming more and more difficult to find. This free flow replacement manifold helps the engine to breathe and gives improved air to fuel ratio balance. ... See more
PLUG, for servo boss
Part Number: NPN
Application: BN4 from C.E.48863, BN6, BN7, BT7, BJ7, BJ8
WASHER
Part Number: 6K433
Application: BN4 from C.E.48863, BN6, BN7, BT7
PLUG, for vacuum take off
Part Number: NPN
Application: BN4 from C.E.48863, BN6, BN7, BT7, BJ7
CLIP, thermo capillary pipe
Part Number: 725-025
Application: BN6 from (e)66673, BN7, BT7, BJ7, BJ8
CLIP, with non-used grommet
Part Number: 724-038
Application: BN6 from (e)66673, BN7, BT7, BJ7, BJ8
STUD, head to manifold, inlet, short
Part Number: 53K562
Application: BN4, BN6 to (e)66673 (7 required), BN6 from (e)66673, BN7, BT7 (5 required) and BJ7, BJ8 (6 required)
STUD, head to manifold, inlet, long
Part Number: 53K563
Application: BN6 from (e)66673 & BN7, BT7 (2 required) and BJ7, BJ8 (1 required)
NUT
Part Number: GHF202
Application: BN6 from (e)66673, BN7, BT7, BJ7, BJ8
WASHER, plain
Part Number: WP9
Application: BN6 from (e)66673, BN7, BT7, BJ7, BJ8
WASHER, spring
Part Number: GHF333
Application: BN6 from (e)66673, BN7, BT7, BJ7, BJ8
STUD, manifold to carburettor
Part Number: CHS2516
Application: BN4 from C.E.48863, BN6, BN7, BT7, BJ7
BOLT, inlet to exhaust
Part Number: BH605261
Application: BN7, BT7, BJ7, BJ8
GASKET, inlet to exhaust manifold
Part Number: 021-429
Application: BN4 from C.E.48863, BN6, BN7, BT7, BJ7, BJ8
HEAT SHIELD
Part Number: 372-105
Application: BN4 from C.E.48863, BN6, BN7, BT7, BJ7
INSULATION SET, w/rivets
Part Number: 372-106
Application: BN4 from C.E.48863, BN6, BN7, BT7, BJ7
SPACER
Part Number: 112866
Application: BN4 from C.E.48863, BN6, BN7, BT7
Regular Price: £19.79
Special Price £17.81
GASKET, heat shield to carburettor
Part Number: 112867
Application: BN4 from C.E.48863, BN6, BN7, BT7, BJ7
CLIP, rear overflow pipe
Part Number: 725-005
Application: BN4 from C.E.56201, BN6, BN7 & BT7 to (e)29D-H2863
SCREW
Part Number: PMZ307
Application: BN4 from C.E.56201, BN6, BN7 & BT7 to (e)29D-H2863
NUT
Part Number: GHF206
Application: BN4 from C.E.56201, BN6, BN7 & BT7 to (e)29D-H2863
WASHER, spring
Part Number: GHF331
Application: BN4 from C.E.56201, BN6, BN7 & BT7 to (e)29D-H2863
GROMMET, overflow pipe
Part Number: 725-020
Application: BN4 from C.E.56201, BN6, BN7, BT7
GROMMET, with unused clip
Part Number: 724-038
Application: BN4 from C.E.56201, BN6, BN7, BT7