CORE PLUG, cupped, 1 5/8"
Part Number: AEH592
Application: BN7, BT7, BJ7, BJ8
CORE PLUG, cupped, 1 5/16"
Part Number: AEC876
Application: BN7, BT7, BJ7, BJ8
DRAIN PIPE, rear bearing cap
Part Number: NPN
Application: BN4 from C.E.57182, BN6, BN7, BT7, BJ7, BJ8
ENGINE MOUNTING PLATE, front
Part Number: NPN
Application: BN7 & BT7 from (e)29E-H101, BJ7, BJ8
STUD, cylinder head, long
Part Number: AEC711
Application: 2 port head
Notes: Studs should be installed only finger tight in the engine block to avoid possible cracking into the water jacket.... See more
STUD, cylinder head, short
Part Number: AEC604
Application: 6 port head
Notes: Studs should be installed only finger tight in the engine block to avoid possible cracking into the water jacket.... See more
SUMP, alloy
Part Number: AEC203AL
Notes: These finned, cast aluminium oil pans are exact replicas of the competition pans fitted to "Works Prepared" 6-cylinder Austin-Healeys. They improve oil cooling and help stiffen the bottom end of the cylinder block on highly stressed competition engines. Their thick, smoothly machined flange avoids the problem of oil leaks caused by bent flanges on stock pressed steel pans. As stock oil pan bolts are too short for use with this oil pan, replacement bolts, washers, and drain plug are included. ... See more
BOLT, sump to crankcase
Part Number: SH604041
Application: BN7, BT7, BJ7, BJ8
BOLT, sump & manifold drain pipe clip to crankcase
Part Number: GHF101
Application: BN7, BT7, BJ7, BJ8
OIL LINE, flexible
Part Number: AHU1020
Application: BN4, BN6, BN7, BT7,BJ7, BJ8
DIPSTICK
Part Number: 021-914
Application: BN4 to BJ8 to (e)29K-H278
SIDE COVER, front
Part Number: 835-245
Application: BN4, BN6, BN7, BT7, BJ7
SIDE COVER, centre, stock type
Part Number: 12A1386
Application: BN4, BN6, BN7, BT7,BJ7, BJ8 to (e)29F-3953
SIDE COVER, centre, alloy alternative
Part Number: 460-051
Application: BN4, BN6, BN7, BT7,BJ7, BJ8 to (e)29F-3953
GASKET, cork, centre
Part Number: 12A1139
Application: BN4, BN6, BN7, BT7,BJ7, BJ8 to (e)29F-3953
BOLT
Part Number: BH605101
Application: BN4, BN6, BN7, BT7,BJ7, BJ8 to (e)29F-3953
WASHER, plain
Part Number: 724-055
Application: BN4, BN6, BN7, BT7,BJ7, BJ8 to (e)29F-3953
SIDE COVER, centre
Part Number: 12A1386
Application: BJ8 from (e)29F-3954
Notes: Can be used on all for improved sealing if used as a set.
GASKET, rubber, centre
Part Number: GUG5505GM
Application: BJ8 from (e)29F-3954
Notes: Can be used on all for improved sealing if used as a set.
SEAL, rubber
Part Number: 12A1176
Application: BJ8 from (e)29F-3954
Notes: Can be used on all for improved sealing if used as a set.
WASHER, cup
Part Number: 12A1177
Application: BJ8 from (e)29F-3954
Notes: Can be used on all for improved sealing if used as a set.
BOLT
Part Number: SH605091
Application: BJ8 from (e)29F-3954
Notes: Can be used on all for improved sealing if used as a set.
PIPE, oil feed, tachometer drive
Part Number: 021-260
Application: BN4, BN6, BN7, BT7, BJ7
BOLT, union
Part Number: 021-933
Application: BN4, BN6, BN7, BT7, BJ7
BOLT, union
Part Number: 021-934
Application: BN4, BN6, BN7, BT7, BJ7
ENGINE PAINT, BMC green, 12 oz. aerosol
Part Number: CCEP3
Notes: Used only on Abingdon built BN4s with 2-port heads.
GASKET SET, cylinder head
Part Number: 524-050
Application: BN4 (2 port)
Notes: Includes gaskets for cylinder head, valve cover, manifolds, exhaust flanges, carburettor mounting and valve stem seals.... See more
GASKET SET, cylinder head
Part Number: GEG128
Application: BN4 (6 port), BN6, BN7, BJ7, BJ7, BJ8
Notes: Includes gaskets for cylinder head, valve cover, manifolds, exhaust flanges, carburettor mounting and valve stem seals.... See more
GASKET SET, bottom end
Part Number: GEG243
Application: BN4-BJ8
Notes: Includes items 15, 26, 31, 54, 62, 77, 81 along with gaskets for the oil filter adaptor, oil pump, tensioner, thermostat, timing cover, water outlet elbow & pump.... See more