NUT, mainshaft
Part Number: BTB753
Application: 3 synchro non overdrive
WASHER, spring
Part Number: WL600121
Application: 3 synchro non overdrive
OIL SEAL, rear
Part Number: 1H3275Z
Application: 3 synchro non overdrive
BEARING, rear
Part Number: 104433
Application: 3 synchro non overdrive
DISTANCE TUBE
Part Number: AEH3242
Application: 3 synchro non overdrive
GEAR, speedometer
Part Number: 1H3369
Application: 3 synchro non overdrive
WOODRUFF KEY
Part Number: WKN304
Application: 3 synchro non overdrive
CLIP, mainshaft
Part Number: 22H193
Application: 3 synchro with overdrive
SPRING RING
Part Number: 22H228
Application: 3 synchro with overdrive
WOODRUFF KEY
Part Number: WKN304
Application: 3 synchro with overdrive
CAM, pump operating
Part Number: 22H190
Application: 3 synchro with overdrive
NUT, distance piece
Part Number: 11G3225
Application: 3 synchro with overdrive
WASHER LOCK
Part Number: 11G3226
Application: 3 synchro with overdrive
Input Shaft, 23 splined clutch
Part Number: 22H56
Application: 3 synchro, (e) 18G-18GA
Input Shaft, 0.85" diameter, spigot
Part Number: 22H843SH
Application: 3 synchro, from (e) 18GB
BUSH, (2nd gear)
Part Number: 11G3028
Application: 3 synchro, to (e) 18GB 31002
2ND GEAR
Part Number: 22H230
Application: 3 synchro, from (e) 18GB 31003
LOCKTAB, reverse idler
Part Number: 1B3363
Application: 3 synchro
Notes: The original locktab (Part No.: 1B3363) is no longer available. Please use alternative locktab (Part No.: AEC340). To use AEC340 for gearbox reverse idler locking bolt applications the locktab should be cut half way along the joining bar. The locktab can then be positioned on the reverse idler retaining bolt. The bolt should be installed and torque to the correct setting ensuing the locktab bar is positioned to act against the gearbox casing, the locktab can then be bent up to lock the bolt head.... See more
LOCKTAB, reverse idler
Part Number: AEC340
Application: 3 synchro
Notes: The original locktab (Part No.: 1B3363) is no longer available. Please use alternative locktab (Part No.: AEC340). To use AEC340 for gearbox reverse idler locking bolt applications the locktab should be cut half way along the joining bar. The locktab can then be positioned on the reverse idler retaining bolt. The bolt should be installed and torque to the correct setting ensuing the locktab bar is positioned to act against the gearbox casing, the locktab can then be bent up to lock the bolt head.... See more
LAYGEAR, (22H54 marking)
Part Number: 22H54
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
SPACER TUBE
Part Number: 11G3026
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
CIRCLIP
Part Number: 11G3027
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
Layshaft
Part Number: 1H3305
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
Layshaft, 3 synchro, uprated
Part Number: 1H3305X
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
BEARING, needle roller
Part Number: AAU3052
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
BEARING, needle roller
Part Number: 3H2865
Application: To (e) 18GB UH 74719
Notes: Improved
Laygear supported on 3 bearings
Bearing, needle roller
Part Number: 3H2865A
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
Thrust Washer, front
Part Number: 1G3576
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
Thrust Washer, rear, +0.155"
Part Number: 1G3577
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
Thrust Washer, rear, +0.157"
Part Number: 1G3578
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
Thrust Washer, rear, +0.160"
Part Number: 1G3579
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
Thrust Washer, rear, +0.163"
Part Number: 1G3580
Application: To (e) 18GB UH 74719
Notes: Laygear supported on 3 bearings
LAYGEAR, (22H931 marking)
Part Number: 22H931
Application: From (e) 18GB UH 74720
Notes: Laygear supported on 4 bearings
LAYGEAR, (22H1301 marking)
Part Number: 22H1301
Application: From (e) 18GB UH 74720
Notes: Aftermarket. Laygear supported on 4 bearings
SPACER TUBE
Part Number: 22H672
Application: From (e) 18GB UH 74720
Notes: Fits 22H931. Laygear supported on 4 bearings
SPACER TUBE
Part Number: 22H1282
Application: From (e) 18GB UH 74720
Notes: Fits 22H1301. Laygear supported on 4 bearings
CIRCLIP
Part Number: 11G3027
Application: From (e) 18GB UH 74720
Notes: Laygear supported on 4 bearings
Layshaft, 0.668"
Part Number: 88G400
Application: From (e) 18GB UH 74720
Notes: Laygear supported on 4 bearings
Layshaft, 0.668", aftermarket
Part Number: 88G400Z
Application: From (e) 18GB UH 74720
Notes: Aftermarket. Laygear supported on 4 bearings
BEARING, (layshaft)
Part Number: 22H471
Application: From (e) 18GB UH 74720
Notes: Laygear supported on 4 bearings
Thrust Washer, front, 0.154-0.156"
Part Number: 22H466
Application: From (e) 18GB UH 74720
Notes: Laygear supported on 4 bearings
Thrust Washer, rear, 0.154-0.156"
Part Number: 22H467
Application: From (e) 18GB UH 74720
Notes: Laygear supported on 4 bearings
Thrust Washer, rear, 0.157-0.159"
Part Number: 22H468
Application: From (e) 18GB UH 74720
Notes: Laygear supported on 4 bearings
Thrust Washer, rear, 0.160-0.161"
Part Number: 22H469
Application: From (e) 18GB UH 74720
Notes: Laygear supported on 4 bearings
Thrust Washer, rear, 0.163-0.164"
Part Number: 22H470
Application: From (e) 18GB UH 74720
Notes: Laygear supported on 4 bearings