Save up to 25% on over 5000 parts and accessories from our big name brands!

 

LANGUAGE:  

   MOSS BRANCHES
Select Model
  • 124 Spider
  • Austin-Healey 100-3000
  • Jaguar
  • MGA
  • MGB
  • MGF
  • Mini
  • Minor
  • MX-5
  • Spitfire
  • Sprite & Midget
  • T Type
  • TR2-4A
  • TR5-6
  • All products
  • All tools
  • All Dynolite Oils

         MG   |   Triumph   |   Austin Healey   |   Classic Mini    |   Morris   |   Jaguar   |   Mazda MX-5   |   Big Brand Sale Now On

Eastwood Dual Voltage Powder Gun

Regular Price: £180.50

Special Price £153.43

In Stock

Powder coat like a pro…

The Dual Voltage HotCoat gun has 2 settings that allows complete coverage in tight spots or large areas and is one of the best powder coating guns on the market today. Why powder coat? Because it gives you one of the most economical, colour-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the colour selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colours stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

One 8-oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the over sprayed powder. Contains no environmentally harmful solvents. HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

Please Note: You will need to buy a transformer from any good electrical store to use this product. The transformer will “step down” in voltage from 240v to 120v.

Contents include: Includes the Dual-Voltage HotCoat Powder Coating Gun, dual-voltage power supply, activation switch, ground clamp and cable, and an empty 8-oz. bottle.

Safety
Use a disposable dust mask when handling or applying powder. Powder, like common flour, can be explosive when suspended in the air in high concentrations. To minimize any explosion risk, sweep up—do not vacuum—powder from the floor. Cure powder in a well-ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh filter cartridges when curing or inspecting flow-out progress.

Part Number: 012-171

  • specification
    • Moss USA Part Number 012-171
      Included Quantity Kit
      Brand Eastwood
      Condition New
      Manufacturer Part No. 11676
  • instructions

You may also be interested in...