Save More Sale 2020 - Save Up To 15%*



Select Model
  • 124 Spider
  • Austin-Healey 100-3000
  • Jaguar
  • MGA
  • MGB
  • MGF
  • Mini
  • Minor
  • MX-5
  • Spitfire
  • Sprite & Midget
  • T Type
  • TR2-4A
  • TR5-6
  • All products
  • All tools
  • All Dynolite Oils

                   MG    |     Triumph    |     Austin Healey    |     Mini     |     Morris    |     Jaguar    |     Mazda    |     Save More Sale

CSI-Ignition Distributor & Immobiliser, Tuned, 43D4, negative earth


Available to Order

CSI-Ignition distributors offer a fully electronic ignition system built into the correct type of Lucas distributor housing to suit your car, keeping the original appearance in the engine bay. You can only tell the difference when you remove the distributor cap!

Gone are the points and condenser and mechanical advance mechanism, all replaced with a high quality electronic ignition system manufactured using military specification components for durability and reliability. These distributors are maintenance free (no points to adjust), and offer the benefits of, easier starting & smoother running, more torque & power, reduced fuel consumption & emissions. They also eliminate the weaknesses of mechanical timing advance and problems such as points bounce ensuring correct ignition timing throughout the rev range.

Each CSI-Ignition distributor features 16 easily switchable, optimised ignition curves to allow timing adjustment to suit your car’s engine and fuel specifications. Alternative advance curves can be selected to suit your engine’s state of tune making them ideal for modified engines. Curves are easily selected using a screwdriver in a rotary switch, with a bright flashing LED indicator to show the selected curve all concealed underneath the distributor cap. The distributors also come with an electronic immobiliser system to prevent unwanted starting of the engine. The immobiliser system features a compact receiver, which should be fitted close to the ignition switch but out of sight, and an electronic key. Installation is straightforward. As the CSI-Ignition distributor uses the correct type of distributor body for the application it is a direct swap. Full instructions and ignition curve selection guidance is included.

We offer a wide range of CSI-Ignition distributors for a variety of applications. They are available 'optimised' with vacuum advance (push-on type only) to suit road or uprated cars running on SU carburettors, or 'tuned' without vacuum advance for cars running Weber type carburettors. Please note: Some units may only be available to order.

Note: You must use the conventional (non transformer) type coil with a minimum resistance of 2.5 Ohms, such as our sports coil TT2981 (3.0 Ohms), Bypass the ballast resistor if fitted. The use of a transistor type coil will damage the CSI distriubtor and invalidate any warranty.

Part Number: CSD6423681

  • specification
    • Year 74 - 80
      Model MGB
      Included Quantity Single
      Polarity Negative Earth
      Brand CSI
      Condition New
      Manufacturer Part No. CSI-MG-IT-16
  • instructions
    • |