Save More Sale 2024 - Save Up To 18%*

 

STORE LOCATION Store Location: 

☎  NEED ASSISTANCE? CALL 0800 281 182 OR SELECT A BRANCH  ▼
Select Model
  • Austin-Healey 100-3000
  • Jaguar
  • MGA
  • MGB
  • MGF
  • Mini
  • Minor
  • MX-5
  • Spitfire
  • Sprite & Midget
  • T Type
  • TR2-4A
  • TR5-6
  • All products
  • All tools
  • All Dynolite Oils

 

Fuel Pumps - Cube Type by Facet

Fuel Pumps - Cube Type by Facet

For carburettor cars the standard fuel pump may not be able to maintain adequate fuel pressure at higher engine speeds, particularly with a tuned car. The Facet range of fuel pumps will suit all modified applications.

Pumps should ideally be mounted at the rear of the car below fuel tank level as they push fuel better than they draw fuel. However they can be mounted up to 300mm above the bottom of the tank. Fitting an electric fuel pump will eliminate problems associated with vapour lock and give constant fuel pressure even at high temperatures.

The pumps come in a variety of pressures according to requirements. Fine-tuning of the fuel pressure can be easily achieved by installing a Fuel Pressure Regulator, available with or without a filter. You will have to re-plumb the fuel system around the new pump using a combination of standard pipes and hoses. With safety in mind, we also supply a Fuel Pump Inertia Switch Kit, so that in the event of an accident, fuel delivery is cut-off.

If you are replacing a manual pump with an electric one, you will also need a Fuel Pump Blanking Plate.

Please check thread and pipe size before ordering the fuel pump unions and use with the listed fuel pumps.

  Description Price
(each)
Qty  
Facet Fuel Pump Kit, cube, fast road, up to 150 bhp Part Number: TMG2931K Notes: This pump features: Flow Rate: 32 US Gal/hr, Pressure: 4.5 - 7.0 psi, Engine Power Range: up to 150bhp, Union Size: 8mm x 1/8 th, Dry Prime Height: 0.3m
£102.90
Facet Fuel Pump, cube, fast road, up to 150 bhp Part Number: MGS2931 Notes: This pump features: Flow Rate: 34 US Gal/hr, Pressure: 7.0 - 10.0 psi, Engine Power Range: up to 180 bhp, Union Size: 8mm x 1/8 th, Dry Prime Height: 0.3m
£71.00