PISTON SET, standard
Part Number: 420-018
Application: TB-TF, 1250cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
Piston Set, engine set, +0.020"
Part Number: 420-038
Application: TB-TF, 1250cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
Piston Set, engine set, +0.030"
Part Number: 420-048
Application: TB-TF, 1250cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
Piston Set, engine set, +0.040"
Part Number: 420-058
Application: TB-TF, 1250cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
Piston Set, engine set, +0.060"
Part Number: 420-068
Application: TB-TF, 1250cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
Piston Set, engine set, +0.080"
Part Number: 420-078
Application: TB-TF, 1250cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
Piston Set, engine set, +0.100"
Part Number: 420-088
Application: TB-TF, 1250cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
Piston Set, engine set, +0.120"
Part Number: 420-098
Application: TB-TF, 1250cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
PISTON SET, standard
Part Number: 420-218
Application: TF, 1500cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
Piston Set, engine set, +0.020"
Part Number: 420-238
Application: TF, 1500cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
Piston Set, engine set, +0.040"
Part Number: 420-258
Application: TF, 1500cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
Piston Set, engine set, +0.060"
Part Number: 420-268
Application: TF, 1500cc
Notes: We are pleased to offer a complete range of Aerolite brand pistons. These high quality pistons are manufactured to the original solid skirt 3-ring design, but incorporate the very latest in high strength, high silicon content aluminium alloy. All pistons are produced in permanent steel moulds for maximum strength yet light weight.... See more
RING SET, standard
Part Number: 421-010
Application: TB-TF, 1250cc
Notes: 3 ring Mowog & Aerolite pistons
Ring Set, engine set, +0.020"
Part Number: 421-020
Application: TB-TF, 1250cc
Notes: 3 ring Mowog & Aerolite pistons
Ring Set, engine set, +0.030"
Part Number: 421-030
Application: TB-TF, 1250cc
Notes: 3 ring Mowog & Aerolite pistons
Ring Set, engine set, +0.040"
Part Number: 421-040
Application: TB-TF, 1250cc
Notes: 3 ring Mowog & Aerolite pistons
Ring Set, engine set, +0.060"
Part Number: 421-050
Application: TB-TF, 1250cc
Notes: 3 ring Mowog & Aerolite pistons
RING SET, standard
Part Number: 421-060
Application: TB-TF, 1250cc
Notes: Most 4-ring & Aerolite .080 thou pistons
Ring Set, engine set, +0.020"
Part Number: 421-070
Application: TB-TF, 1250cc
Notes: Most 4-ring & Aerolite .080 thou pistons
Ring Set, engine set, +0.030"
Part Number: 421-080
Application: TB-TF, 1250cc
Notes: Most 4-ring & Aerolite .080 thou pistons
Ring Set, engine set, +0.040"
Part Number: 421-090
Application: TB-TF, 1250cc
Notes: Most 4-ring & Aerolite .080 thou pistons
Ring Set, engine set, +0.060"
Part Number: 421-100
Application: TB-TF, 1250cc
Notes: Most 4-ring & Aerolite .080 thou pistons
Ring Set, engine set, +0.080"
Part Number: 421-110
Application: TB-TF, 1250cc
Notes: Most 4-ring & Aerolite .080 thou pistons
Ring Set, engine set, +0.100"
Part Number: 421-120
Application: TB-TF, 1250cc
Notes: Aerolite & AE no. 12387 pistons (these numbers are found stamped in the crowns of certain after-market pistons, and fit those pistons. We do not stock rings for other after-market pistons).... See more
Ring Set, engine set, +0.120"
Part Number: 421-130
Application: TB-TF, 1250cc
Notes: Aerolite & AE no. 12387 pistons (these numbers are found stamped in the crowns of certain after-market pistons, and fit those pistons. We do not stock rings for other after-market pistons).... See more
Ring Set, engine set, +0.020"
Part Number: 421-200
Application: TF, 1500cc
Notes: All 3-ring & 4 ring pistons
Ring Set, engine set, +0.030"
Part Number: 421-210
Application: TF, 1500cc
Notes: All 3-ring & 4 ring pistons
Ring Set, engine set, +0.040"
Part Number: 421-220
Application: TF, 1500cc
Notes: All 3-ring & 4 ring pistons
Ring Set, engine set, +0.060"
Part Number: 421-230
Application: TF, 1500cc
Notes: All 3-ring & 4 ring pistons
CYLINDER LINER, (sleeve)
Part Number: 426-010
Application: TB-TF, 1250cc
Notes: Length: 158mm, ID: 65mm, OD: 70mm
CYLINDER LINER, (sleeve)
Part Number: 426-030
Application: TF, 1500cc
Notes: Length: 203mm, ID: 71mm, OD: 76mm.
BRONZE VALVE GUIDE, inlet
Part Number: 423-215
Application: TB-TF
Notes: The low friction and high strength characteristics of bronze means much less guide and valve stem wear than standard guides.... See more
BRONZE VALVE GUIDE, exhaust
Part Number: 423-225
Application: TB-TF
Notes: The low friction and high strength characteristics of bronze means much less guide and valve stem wear than standard guides.... See more
OIL SEAL, valve stem, improved
Part Number: ADU4905
Application: TB-TF
Notes: If using improved oil seals ADU4905 then the oil deflector 1H725 is no longer needed.
SHAFT, rocker, 14” long
Part Number: 451-170
Application: TB-TD to (e) 9007
SHAFT, rocker, tuftride,, 14” long
Part Number: 451-170TUF
Application: TB-TD to (e) 9007
SHAFT, rocker, 14 7/8” long
Part Number: 451-180
Application: TD from (e) 9008 & TF
SHAFT, rocker, tuftride,, 14 7/8” long
Part Number: 451-180TUF
Application: TD from (e) 9008 & TF
BOLT, rocker bracket, 8mm, 3 5/16" long
Part Number: 320-330
Application: TA-TF
Notes: 8 required for TA. 4 required for TB, TC, TD & TF.
ROCKER, number 1 and 5 valve
Part Number: 433-150
Application: TB-TD to (e) 9007
ROCKER, number 1 and 5 valve
Part Number: 433-160
Application: TD from (e) 9008 & TF
ROCKER, number 4 and 8 valve
Part Number: 433-130
Application: TB-TD to (e) 9007
ROCKER, number 4 and 8 valve
Part Number: 433-140
Application: TD from (e) 9008 & TF
BUSH, rocker, long
Part Number: 330-090
Application: TD from (e) 9008 & TF
SPACER SPRING, centre, long
Part Number: 329-360
Application: TB-TD to (e) 9007
SPACER SPRING, centre
Part Number: 329-160
Application: TD from (e) 9008 & TF
SPACER SPRING, intermediate
Part Number: 329-160
Application: TB-TD to (e) 9007
SPACER SPRING
Part Number: 329-150
Application: TD from (e) 9008 & TF
Notes: For front, intermediate & rear
SPACER SPRING, front & rear
Part Number: 329-150
Application: TB-TD to (e) 9007
WASHER, spacer spring
Part Number: 324-420
Application: TB-TF
Notes: 2 required for TB-TD To (e) 9007. 10 required for TD-TF From (e) 9008.
ADJUSTING SCREW, rocker, short
Part Number: 433-200
Application: TA-TD to (e) 17297
ADJUSTING SCREW, rocker, long
Part Number: 433-210
Application: TD from (e) 17298 & TF
CAM FOLLOWER SET
Part Number: 433-365
Application: TB-TF
Notes: For Crane Cams only. (Part No. 451-260X)
Ring Gear, 120 teeth, 10 3/4" ID
Part Number: P164
Application: TD from (e) 9408 & TF
BOLT & NUT SET, connecting rod
Part Number: 321-269
Application: TB-TF
Notes: Contains 8 bolts and 8 nuts
BOLT & NUT SET, connecting rod
Part Number: 321-268
Application: TB-TF
Notes: Contains 8 bolts and 8 nuts
MAIN BEARING SET, standard
Part Number: 424-650
Application: TB-TF
Notes: These main bearings have oversized thrust faces on the centre bearing to compensate for wear. Clean up thrust faces in block if necessary. Use glass plate with 320 grit or finer sandpaper on bearing to achieve 0.002" endfloat. Clean all grit from bearing.... See more
Bearing Set, crankshaft main, +0.010"
Part Number: 424-750
Application: TB-TF
Notes: These main bearings have oversized thrust faces on the centre bearing to compensate for wear. Clean up thrust faces in block if necessary. Use glass plate with 320 grit or finer sandpaper on bearing to achieve 0.002" endfloat. Clean all grit from bearing.... See more
Bearing Set, crankshaft main, +0.020"
Part Number: 424-800
Application: TB-TF
Notes: These main bearings have oversized thrust faces on the centre bearing to compensate for wear. Clean up thrust faces in block if necessary. Use glass plate with 320 grit or finer sandpaper on bearing to achieve 0.002" endfloat. Clean all grit from bearing.... See more
Bearing Set, crankshaft main, +0.030"
Part Number: 424-850
Application: TB-TF
Notes: These main bearings have oversized thrust faces on the centre bearing to compensate for wear. Clean up thrust faces in block if necessary. Use glass plate with 320 grit or finer sandpaper on bearing to achieve 0.002" endfloat. Clean all grit from bearing.... See more
Bearing Set, crankshaft main, +0.040"
Part Number: 424-900
Application: TB-TF
Notes: These main bearings have oversized thrust faces on the centre bearing to compensate for wear. Clean up thrust faces in block if necessary. Use glass plate with 320 grit or finer sandpaper on bearing to achieve 0.002" endfloat. Clean all grit from bearing.... See more
Bearing Set, crankshaft main, +0.050"
Part Number: 424-905
Application: TB-TF
Notes: These main bearings have oversized thrust faces on the centre bearing to compensate for wear. Clean up thrust faces in block if necessary. Use glass plate with 320 grit or finer sandpaper on bearing to achieve 0.002" endfloat. Clean all grit from bearing.... See more
Bearing Set, crankshaft main, +0.060"
Part Number: 424-910
Application: TB-TF
Notes: These main bearings have oversized thrust faces on the centre bearing to compensate for wear. Clean up thrust faces in block if necessary. Use glass plate with 320 grit or finer sandpaper on bearing to achieve 0.002" endfloat. Clean all grit from bearing.... See more
CAMSHAFT, Crane Cam, standard grind
Part Number: 451-260X
Application: TB-TF
Notes: Must be used with special cam followers part no. 433-365, item 38
CAM BEARING SET
Part Number: 424-968
Application: TB-TF
Notes: New front cam bearings must be fitted each time the cylinder block is hot-tanked, as the caustic solution will destroy the thin wall bearing shell. New front cam bearings must be line-reamed after installation. This procedure must be entrusted to a competent automotive machine shop.... See more
ENGINE GASKET SET, complete
Part Number: 297-708
Application: 1250cc to (e) 22734
ENGINE GASKET SET, complete
Part Number: 297-808
Application: 1250cc from (e) 22735
HEAD GASKET SET, aftermarket
Part Number: G100Z
Application: 1250cc to (e) 22734
CONVERSION SET
Part Number: 297-228
Application: TA
Notes: full bottom end set inc gearbox to engine gasket
SUMP GASKET SET
Part Number: AAA5659X
Application: TB-TF
Notes: includes front lip seal and rear cork seal