COIL SPRING KIT, blue
Part Number: FAM3968X
Notes: Softer, front and rear coil spring kit replaces the rubber cone
COIL SPRING KIT, red
Part Number: FAM3968HX
Notes: Firmer, front and rear coil spring kit replaces the rubber cone
HI-LO TRUMPET
Part Number: GAC84371
Notes: Includes 2 x Hi-Lo cones & 2 x 21A423. Adjustable height cones kit
RODS, extension, (pair)
Part Number: GAC84372
Notes: Used with GAC84371 when fitting to rear suspension
SHOCK ABSORBER KIT, Spax
Part Number: SPCK19
Notes: Coil over kit, height adjustable front and rear kit standard height
SHOCK ABSORBER KIT, Spax
Part Number: SPCK20
Notes: Coil over kit, height adjustable front and rear kit lowered height
REPAIR KIT
Part Number: GSV1125
Notes: Radius arm fulcrum pin. GSV1125 requires a special tool for reaming after installation of the bearings. The special reamer 18G588 is NLA. However reconditioned and new radius arms are available. See below.... See more
HUB, with short studs
Part Number: 21A2023
Application: To 1984, 10" wheels
HUB, with long studs
Part Number: RLH10021
Application: From 1984, 12" wheels
WHEEL STUD, long
Part Number: RLJ10001
Application: From 1984, 12" wheels
WHEEL NUT, round chamfer
Part Number: 88G322
Application: Standard 10" wheels
Wheel Nut, 60° chamfer
Part Number: 113087
Application: Standard 12" wheels
WHEEL NUT, round chamfer*
Part Number: FAM5701
Application: 10" with hub caps
Notes: If your car is fitted with wheel trims retained by wheel nuts, you will require wheel nuts marked with an asterisk. Care must be taken when ordering as 'radius' and 'chamfered' wheel nuts are not interchangeable!... See more
Wheel Nut, 60° chamfer
Part Number: FAM3428
Application: 12" with hub caps
Notes: If your car is fitted with wheel trims retained by wheel nuts, you will require wheel nuts marked with an asterisk. Care must be taken when ordering as 'radius' and 'chamfered' wheel nuts are not interchangeable!... See more
Wheel Nut, 60° chamfer, stainless steel
Part Number: RRD10009
Notes: Rover alloy wheels, feature a loose washer and stainless cap
GAUGE, camber measuring
Part Number: MTR4201
Notes: This gauge allows you to correctly set up your suspension to get the best from your Mini where it excels