Permatex Dual Syringe, Multi Metal, 2x25ml
£8.89
Sign-up for price change notifications
In Stock
Versatile, easy-to-use, multi-metal adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing.
• Sets in four minutes, no clamping needed.
• Dark grey appearance.
• Fills gaps and will not shrink.
• When cured, can be drilled, sanded, threaded or filed.
• Resistant to water and solvents.
• Temperature range -60°F to 300°F (-51°C to 149°C).
• Permanent strength up to 4500 PSI.
How to use
• PROTECT: Work area must be protected from accidental spills
• CLEAN: Surfaces must be clean, dry and free of grease and oil.
• PREPARE: Roughen smooth surfaces (using abrasivesor sandpaper).
• OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger backslightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger to stop flow. Snap cap back on.
• MIX THOROUGHLY: Thoroughly mix with paddle provided for two minutes until evenly colored.
• APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately(product sets in approximately 4 - 6 minutes). Remove any excess immediately.
• CURE TIME: Usable strength is reached in 4 hours at 72ºF (22ºC). Cooler temperatures may require longer set time.
• CLEAN-UP: Attach nozzle cap and store in moulded tray.[/expand]
WARNING: Adhesive will not bond most polyethylene or polypropylene plastics
Suggested Application for Automobile:
• Ideal for complex, multi-piece assemblies.
• Bonds rigid materials including aluminium, brass, chrome, copper, iron, stainless steel, steel.
• Use to seal welded seams, fills metal cracks, mount metal components