Save More Sale 2024 - Save Up To 18%*

 

STORE LOCATION Store Location: 

☎  NEED ASSISTANCE? CALL 0800 281 182 OR SELECT A BRANCH  ▼
Select Model
  • Austin-Healey 100-3000
  • Jaguar
  • MGA
  • MGB
  • MGF
  • Mini
  • Minor
  • MX-5
  • Spitfire
  • Sprite & Midget
  • T Type
  • TR2-4A
  • TR5-6
  • All products
  • All tools
  • All Dynolite Oils

 

Permatex Dual Syringe, Plastic Weld Epoxy, 2x25ml

Permatex Dual Syringe, Plastic Weld Epoxy, 2x25ml

£8.99

In Stock

GGL1041 Permatex Dual Syringe, Plastic Weld Epoxy, 2x25ml PERMATEX DUAL SYRINGE

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces.
Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination.
Fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes.

NOTE:

Will not bond most polyethylene or polypropylene plastics.
• Bonds hard and soft plastics to specified surfaces.
• Requires no primers, sets in five minutes at room temperature.
• Cream appearance.
• Gap filling to 0.125 inch.
• Water resistant and good chemical resistance.
• Temperature range -51°C to 121°C.
• Permanent strength up to 3500 PSI.

How to use:
• PROTECT: Work area must be protected from accidental spills.
• CLEAN: Surfaces must be clean, dry and free of grease and oil.
• PREPARE: Roughen smooth surfaces (using abrasivesor sandpaper).
• OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger backslightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap. Push
plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back
plunger to stop flow. Snap cap back on.
• MIX THOROUGHLY: Thoroughly mix with paddle provided for two minutes until evenly colored.
• APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately(product sets in approximately 4 - 6 minutes). Remove any excess
immediately.
• CURE TIME: Usable strength is reached in 4 hours at 72ºF (22ºC). Cooler temperatures may require longer set time
• CLEAN-UP: Attach nozzle cap and store in moulded tray.

Suggested Application for Automobile:
• Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood.
• Use for interior trim, fills cracks, bonds most plastic, bonds plastic to vinyl

Part Number: GGL1041

  • specification
    • Included Quantity Single
      Brand Permatex
      Condition New