BOLT, filter head, upper front

Notes: Bypass type

BOLT, filter head, upper rear

Notes: Full flow type

BOLT, filter head, lower rear

STUD, oil filter and banjo fitting

WASHER, locking

BALL, (on balance valve)

SCREW, adjusting

WASHER, lead linger/wire

SPRING, relief valve

BALL

WASHER

GASKET

Sealing Ring, oil filter

OIL FILTER, felt

GUIDE PLATE, oil filter

SPRING, on main bolt

WASHER, rubber

OIL PIPE, filter head to bulkhead

Notes: Including banjo. These items are the same whichever filter head is fitted

NUT, domed

Notes: These items are the same whichever filter head is fitted

WASHER, copper, (outer)

Notes: These items are the same whichever filter head is fitted

WASHER, copper, (inner)

Notes: These items are the same whichever filter head is fitted

HOSE, flexible, stainless steel

Notes: Early TR4. This hose links oil pressure gauge pipe on engine to the pipe on the bulkhead. These items are the same whichever filter head is fitted... See more

PIPE, (rigid), on bulkhead to gauge

Notes: Early TR4. These items are the same whichever filter head is fitted

PIPE, (nylon), replaces flexible pipe

Notes: The nylon pipe replaces the flexible hose and rigid pipe in that it goes direct from the pipe (200646) to the oil pressure gauge. Listed as an 'alternative' to 202793 in the Triumph parts book, but standard on all TR4A's. These items are the same whichever filter head is fitted... See more

GROMMET

Notes: These items are the same whichever filter head is fitted

CLIP, oil pressure pipe to bulkhead

Notes: These items are the same whichever filter head is fitted