GEAR SET, constant mesh
Part Number: 148949
Application: To (g) CD20281
Notes: The gear set 148949 contains three matched items, an constant pinion shaft, constant gear and shell bearing, 145008. It should be used as a complete set to service gearboxes up to (g) CD20281 and runs with mainshafts 208051 & 208052.... See more
CONSTANT PINION SHAFT
Part Number: 216044
Application: From (g) CD20282 to CD21768
CONSTANT PINION SHAFT
Part Number: 219126
Notes: Later fitted alternative To 216871. Use with 159621. The two early types of Constant Pinion Shaft (Part No: 216044 and 216871) are no longer available. The later constant pinion (Part No: 219126) can be used as a replacement, but must be used with matched gear (Part No: 159621) and the mainshaft spigot bearing sleeve (Part No: 145008X).... See more
Bearing, mainshaft spigot, metric
Part Number: 158368
Application: From (g) CD20282
MAINSHAFT, non overdrive, ‘imperial’
Part Number: 208051
Application: To (g) CD20281
MAINSHAFT, non overdrive, ‘imperial’, serviceable replacement
Part Number: 208051SR
Application: To (g) CD20281
MAINSHAFT, non overdrive, ‘metric’
Part Number: 216393
Application: From (g) CD20282 to CD21768
MAINSHAFT, non overdrive, ‘metric’, serviceable replacement
Part Number: 216393SR
Application: From (g) CD20282 to CD21768
MAINSHAFT, non overdrive, ‘metric’
Part Number: 216866
Application: From (g) CD21768 to CR5000/12500
MAINSHAFT, non overdrive, ‘metric’, serviceable replacement
Part Number: 216866SR
Application: From (g) CD21768 to CR5000/12500
Mainshaft, non overdrive, metric
Part Number: TKC824
Application: From (c) CR5001/12501
Mainshaft, overdrive, A type, imperial
Part Number: 208052
Application: To (g) CD20281
Mainshaft, overdrive, A type, metric
Part Number: UKC1933
Application: From (g) CD20282
Mainshaft, overdrive, J type, metric
Part Number: TKC832
Application: From (c) CR1/CF1
SYNCHRO HUB, 3rd & 4th
Part Number: 509649
Application: To (g) CD19740
Notes: The synchro hubs (Part No: 509649 and 153844) are no longer available. We can supply the outer sleeve (Part No: 153844X) for use with existing components.... See more
SYNCHRO HUB, 3rd & 4th
Part Number: 153844
Application: From (g) CD19741
Notes: The synchro hubs (Part No: 509649 and 153844) are no longer available. We can supply the outer sleeve (Part No: 153844X) for use with existing components.... See more
BUSH, third gear, brass
Part Number: 129940
Application: To (c) CR1/CF1
Notes: Bush, part no. 153238, may be considered uprated and can be used to replace 129940. It is recommended that all 3 brass bushes be replaced with steel ones. 1st & 3rd gears should use 15238 instead of 129940.... See more
BUSH, third gear, steel
Part Number: 153238
Application: From (c) CR1/CF1
Notes: Bush, part no. 153238, may be considered uprated and can be used to replace 129940. It is recommended that all 3 brass bushes be replaced with steel ones. 1st & 3rd gears should use 15238 instead of 129940.... See more
BUSH, second gear, brass
Part Number: 129939
Application: To (c) CR5000/CF12500
BUSH, second gear, steel
Part Number: UKC956
Application: From (c) CR5001/CF12501
Notes: Bush part no. UKC956, may only be fitted with 2nd gear TKC454 and the appropriate thrust washers (UKC956 to UKC961).... See more
BUSH, second gear, uprated
Part Number: 129939X
Application: To (c) CR5000/CF12500
GEAR, second
Part Number: 152771X
Application: From (g) CD20282 to CD21768
GEAR, second
Part Number: 216802
Application: From (g) CD21769 to (c) CR5000/CF12500
GEAR, second
Part Number: TKC454
Application: From (c) CR5001/CF12501
Washer, spacer 0.118", silver
Part Number: 129941
Application: To (c) CR5000/CF12500
Washer, spacer 0.121", green
Part Number: 129942
Application: To (c) CR5000/CF12500
Washer, spacer 0.124", blue
Part Number: 129943
Application: To (c) CR5000/CF12500
Washer, spacer 0.127", orange
Part Number: 129944
Application: To (c) CR5000/CF12500
Washer, spacer 0.131", uncoloured
Part Number: 155951
Application: To (c) CR5000/CF12500
Washer, spacer 0.132", yellow
Part Number: 134670
Application: To (c) CR5000/CF12500
Washer, spacer 0.197-0.199"
Part Number: UKC958
Application: From (c) CR5001/CF12501
Notes: The steel ball (BLS106) locates the above four thrust washers.
Washer, spacer 0.200-0.202"
Part Number: UKC959
Application: From (c) CR5001/CF12501
Notes: The steel ball (BLS106) locates the above four thrust washers.
Washer, spacer 0.203-0.205"
Part Number: UKC960
Application: From (c) CR5001/CF12501
Notes: The steel ball (BLS106) locates the above four thrust washers.
Washer, spacer 0.206-0.208
Part Number: UKC961
Application: From (c) CR5001/CF12501
Notes: The steel ball (BLS106) locates the above four thrust washers.
SYNCHRO HUB, 1st, 2nd, reverse
Part Number: 515650
Application: To (g) CD19740
SYNCHRO HUB, 1st, 2nd, reverse
Part Number: 153843
Application: From (g) CD19741
BUSH, first gear, (steel), uprated
Part Number: 153238
Notes: Bush (part no. 153238) may be considered uprated and can be used to replace 129940.
GEAR, first, 33 teeth, (use with 128107)
Part Number: 152770
Application: From (g) CD20282 to (c) CR5000/CF12500
GEAR, first, 32 teeth, use with UKC662
Part Number: 152803
Application: From (c) CR5001/CF12501
CONSTANT GEAR, countershaft
Part Number: NPN
Application: To (g) CD20281
Notes: This item should be fitted with its matched parts in kit number 148949.
GEAR, constant mesh
Part Number: 142434
Application: From (g) CD20282 to CD21768
GEAR, constant mesh, reconditioned
Part Number: 142434SR
Application: From (g) CD20282 to CD21768
CONSTANT GEAR, countershaft
Part Number: 159621
Application: From (g) CD21769
LAY GEAR, 1st & reverse
Part Number: 128107
Application: To (c) CR5000/CF12500
Notes: With 16 tooth first gear, use with 128100SR and 152770
LAY GEAR, 1st & reverse
Part Number: UKC662
Application: From (c) CR5001/CF12501
Notes: With 17 tooth first gear use with 152803
LAYGEAR, 16 tooth, 1st & reverse
Part Number: 128107UR
Notes: Bearings, circlips & washers are fitted
LAYGEAR, 17 tooth, 1st & reverse
Part Number: UKC662UR
Notes: Bearings, circlips & washers are fitted