CONSTANT PINION SHAFT, 1st motion
Part Number: TKC1267
Application: To FR33414
Notes: TKC1267 has a scroll type oil seal; TKC3259 is machined plain to accommodate a rubber lip type seal.
CONSTANT PINION SHAFT, 1st motion
Part Number: TKC3259
Application: From FR33415
Notes: TKC1267 has a scroll type oil seal; TKC3259 is machined plain to accommodate a rubber lip type seal.
SHIM, under synchro spring
Part Number: 037948
Notes: This shim is selectively fitted under each of the springs and balls in the two synchro hubs in the gearbox. Its use is to equalise the outward pressure of the balls in the hub. Equalising the pressure can only be achieved with special spring balance equipment, so it only remains to be said that if you have to take a hub apart for inspection or cleaning, make sure (by means of scribing identifying marks on non-working surfaces of the gear) that the correct shims go back in their respective holes. Along the same lines as the above, use corresponding scribed marks on the hub and outer ring to ensure that the ring is slipped back in place exactly as it was before (and the same way round!).... See more
CIRCLIP, mainshaft
Part Number: TKC6444
Notes: This circlip must always be renewed when re-assembling the main gear cluster.
SYNCHRO HUB, 1st & 2nd, 33 teeth
Part Number: 156911
Notes: 156911 & UKC8748 are only interchangeable if both laygear cluster & reverse idler are fitted at the same time. Once again, an exchange gearbox is advisable if damage is obvious here.... See more
OUTER RING, 1st & 2nd, 33 teeth
Part Number: 156911WO
Notes: 156911 & UKC8748 are only interchangeable if both laygear cluster & reverse idler are fitted at the same time. Once again, an exchange gearbox is advisable if damage is obvious here.... See more
SYNCHRO HUB, 1st & 2nd, 29 teeth
Part Number: UKC8748
Notes: 156911 & UKC8748 are only interchangeable if both laygear cluster & reverse idler are fitted at the same time. Once again, an exchange gearbox is advisable if damage is obvious here.... See more
OUTER RING, 1st & 2nd, 29 teeth
Part Number: UKC8748WO
Notes: 156911 & UKC8748 are only interchangeable if both laygear cluster & reverse idler are fitted at the same time. Once again, an exchange gearbox is advisable if damage is obvious here.... See more
Loading...