FLYWHEEL, with ring gear, reconditioned
Part Number: 201475R
Application: TR2-3 shrink-on ring gear
FLYWHEEL, iron, lightened with ring gear, reconditioned/exchange
Part Number: TT2012
Application: TR2-3 shrink-on ring gear
Notes: This flywheel has also been drilled to suit later diaphragm clutch. The dowel pins (DP408) will need to be moved to suit diaphragm clutch and an extra dowel pin fitted if diaphragm clutch is to be used instead of original style spring clutch. ... See more
FLYWHEEL, with ring gear, reconditioned
Part Number: 115785R
Application: TR3-4 bolt-on ring gear
FLYWHEEL, iron, lightened with ring gear, reconditioned/exchange
Part Number: TT2013
Application: TR3-4 bolt-on ring gear
Notes: This flywheel has also been drilled to suit later diaphragm clutch. The dowel pins (DP408) will need to be moved to suit diaphragm clutch and an extra dowel pin fitted if diaphragm clutch is to be used instead of original style spring clutch. ... See more
FLYWHEEL, iron, lightened with ring gear, reconditioned/exchange
Part Number: TT2112
Application: TR4A
FLYWHEEL, iron, lightened, without ring gear, new
Part Number: 143105X
Application: TR4A
COVER, timing chain
Part Number: 203681
Application: TR2-3A, TR4 to (c) CT21470
CAMSHAFT, exchange
Part Number: 307036R
Notes: Camshafts with special profiles are available, please enquire.
BEARING SET, camshaft
Part Number: AEC3027S
Application: TR3-3A, TR4-4A from (c) TS8997
Notes: Camshaft bearings were not fitted until engine no TS8997. Prior to this, the camshaft rotated directly in the cylinder block.... See more
BEARING, camshaft, centre & rear
Part Number: 113522
Application: TR3-3A, TR4-4A from (c) TS8997
Notes: Camshaft bearings were not fitted until engine no TS8997. Prior to this, the camshaft rotated directly in the cylinder block.... See more
SET SCREW, bearing retaining
Part Number: 110462
Application: TR3-3A, TR4-4A from (c) TS8997
WASHER, plain
Part Number: GHF301
Application: TR3-3A, TR4-4A from (c) TS8997
Ring Set, engine set, 83mm, 3 ring, +0·020"
Part Number: MM817-020
Notes: 83mm 3 ring pistons engine set
Ring Set, engine set, 83mm, 3 ring, +0·030"
Part Number: MM817-030
Notes: 83mm 3 ring pistons engine set
Ring Set, engine set, 83mm, 3 ring, +0·040"
Part Number: MM817-040
Notes: 83mm 3 ring pistons engine set
Ring Set, engine set, 83mm, 3 ring, +0·060"
Part Number: MM817-060
Notes: 83mm 3 ring pistons engine set
Ring Set, engine set, 83mm, 4 ring, +0·020"
Part Number: MM817-120
Notes: 83mm 4 ring pistons engine set
Ring Set, engine set, 83mm, 4 ring, +0·030"
Part Number: MM817-130
Notes: 83mm 4 ring pistons engine set
Ring Set, engine set, 83mm, 4 ring, +0·040"
Part Number: MM817-140
Notes: 83mm 4 ring pistons engine set
Ring Set, engine set, 83mm, 4 ring, +0·060"
Part Number: MM817-160
Notes: 83mm 4 ring pistons engine set
Ring Set, engine set, 86mm, 3 ring, +0·020"
Part Number: MM817-320
Notes: 86mm 3 ring pistons engine set
Ring Set, engine set, 86mm, 3 ring, +0·030"
Part Number: MM817-330
Notes: 86mm 3 ring pistons engine set
Ring Set, engine set, 86mm, 3 ring, +0·040"
Part Number: MM817-340
Notes: 86mm 3 ring pistons engine set
Ring Set, engine set, 86mm, 4 ring, +0·020"
Part Number: MM817-420
Notes: 86mm 4 ring pistons engine set
Ring Set, engine set, 86mm, 4 ring, +0·030"
Part Number: MM817-430
Notes: 86mm 4 ring pistons engine set
Ring Set, engine set, 86mm, 4 ring, +0·040"
Part Number: MM817-440
Notes: 86mm 4 ring pistons engine set
TAB WASHER
Part Number: 105313
Application: TR2-3A, TR4 to (c) CT34071
Notes: The early connecting rod bolts (part no. 105312) must be used with tab washers (105313). Tab washers must NOT be used with the later bolts (part no.138528). These bolts retain their grip by being slightly stretched into tension and if tab washers are used, the continued expansion and contractions as the engine heats up, cools down, means the washers will allow the bolt to 'creep' and ultimately work loose. For this reason, 'stretch' bolts (138528) must never be re-used. As sets 105312 plus 105313 can be used inter-changeably with 138528. Both bolt types should be torqued to 55-60 ft lbs. ... See more
BOLT, (used with tab washers)
Part Number: 105312
Application: TR2-3A, TR4 to (c) CT34071
Notes: The early connecting rod bolts (part no. 105312) must be used with tab washers (105313). Tab washers must NOT be used with the later bolts (part no.138528). These bolts retain their grip by being slightly stretched into tension and if tab washers are used, the continued expansion and contractions as the engine heats up, cools down, means the washers will allow the bolt to 'creep' and ultimately work loose. For this reason, 'stretch' bolts (138528) must never be re-used. As sets 105312 plus 105313 can be used inter-changeably with 138528. Both bolt types should be torqued to 55-60 ft lbs. ... See more
BOLT, self-locking, (used without tab washers)
Part Number: 138528
Application: TR4-4A from (c) CT34072
Notes: The early connecting rod bolts (part no. 105312) must be used with tab washers (105313). Tab washers must NOT be used with the later bolts (part no.138528). These bolts retain their grip by being slightly stretched into tension and if tab washers are used, the continued expansion and contractions as the engine heats up, cools down, means the washers will allow the bolt to 'creep' and ultimately work loose. For this reason, 'stretch' bolts (138528) must never be re-used. As sets 105312 plus 105313 can be used inter-changeably with 138528. Both bolt types should be torqued to 55-60 ft lbs. ... See more
FAN, 4-bladed
Part Number: 202025
Application: TR2-3A
Notes: We have re-tooled 202025 and 209792 and they really are identical to the originals
Regular Price: £123.60
Special Price £105.06
FAN, 4-bladed
Part Number: 209792
Application: TR4-4A
Notes: We have re-tooled 202025 and 209792 and they really are identical to the originals
Regular Price: £123.60
Special Price £105.06
BOLT & SPACER KIT
Part Number: 108498SK
Application: Vehicles fitted with an electric fan
Notes: Allows for removal of the fan extension
CRANKSHAFT, new
Part Number: 301815
Notes: Standard type oil seal. Unavailable for many years, the TR2-4A crankshaft and connecting rods are again available new from Moss.... See more
CRANKSHAFT, reground/exchange
Part Number: 301815R
Notes: Standard type oil seal. Reground cranks are supplied less bearings, allowing you to choose Glacier or replacement shells.... See more
CRANKSHAFT, reground/exchange
Part Number: 301815RX
Notes: Lip type oil seal. Reground cranks are supplied less bearings, allowing you to choose Glacier or replacement shells.... See more
BEARING SET, main, standard
Part Number: AEM3196STD
Application: Glacier bearings
BEARING SET, main, +0.010"
Part Number: AEM3196010
Application: Glacier bearings
BEARING SET, main, +0.020"
Part Number: AEM3196020
Application: Glacier bearings
BEARING SET, main, +0.050"
Part Number: AEM3196050
Application: Glacier bearings
BEARING SET, main, +0.060"
Part Number: AEM3196060
Application: Glacier bearings
BEARING SET, main, standard
Part Number: 108810
Application: Replacement bearings
BEARING SET, main, standard HD
Part Number: 108810HD
Application: Replacement bearings
Notes: Heavy Duty
BEARING SET, main, +0.010"
Part Number: 108810/10
Application: Replacement bearings
BEARING SET, main, +0.010" HD
Part Number: 108810/10HD
Application: Replacement bearings
Notes: Heavy Duty
BEARING SET, main, +0.020"
Part Number: 108810/20
Application: Replacement bearings
BEARING SET, main, +0.020" HD
Part Number: 108810/20HD
Application: Replacement bearings
Notes: Heavy Duty
BEARING SET, main, +0.030"
Part Number: 108810/30
Application: Replacement bearings
BEARING SET, main, +0.030" HD
Part Number: 108810/30HD
Application: Replacement bearings
Notes: Heavy Duty
BEARING SET, main, +0.040"
Part Number: 108810/40
Application: Replacement bearings
BEARING SET, main, +0.040" HD
Part Number: 108810/40HD
Application: Replacement bearings
Notes: Heavy Duty
BEARING SET, main, +0.050"
Part Number: 108810/50
Application: Replacement bearings
THRUST WASHER SET, standard, 0.0925"
Part Number: AEW2004STD
Notes: Adjust crankshaft end float with selective use of thrust washers refer to workshop manual.
Thrust Washer Set, +0.005"
Part Number: AEW2004005
Notes: Adjust crankshaft end float with selective use of thrust washers refer to workshop manual.
Thrust Washer Set, +0.008"
Part Number: AEW2004008
Notes: Adjust crankshaft end float with selective use of thrust washers refer to workshop manual.
Thrust Washer Set, +0.010"
Part Number: AEW2004010
Notes: Adjust crankshaft end float with selective use of thrust washers refer to workshop manual.
Thrust Washer Set, +0.015"
Part Number: AEW2004015
Notes: Adjust crankshaft end float with selective use of thrust washers refer to workshop manual.
BEARING SET, con rod, standard
Part Number: AEB4331STD
Application: Glacier bearings
BEARING SET, con rod, +0.010"
Part Number: AEB4331010
Application: Glacier bearings
BEARING SET, con rod, standard
Part Number: AEB4331STDX
Application: Heavy duty tri-metal
BEARING SET, con rod, standard
Part Number: 117590
Application: Replacement bearings
BEARING SET, con rod, +0.010"
Part Number: 117590/10
Application: Replacement bearings
BEARING SET, con rod, +0.010" HD
Part Number: 117590/10HD
Application: Replacement bearings
Notes: Heavy Duty
BEARING SET, con rod, +0.020"
Part Number: 117590/20
Application: Replacement bearings
BEARING SET, con rod, +0.020" HD
Part Number: 117590/20HD
Application: Replacement bearings
Notes: Heavy Duty
BEARING SET, con rod, +0.030"
Part Number: 117590/30
Application: Replacement bearings
BEARING SET, con rod, +0.030" HD
Part Number: 117590/30HD
Application: Replacement bearings
Notes: Heavy Duty
BEARING SET, con rod, +0.040"
Part Number: 117590/40
Application: Replacement bearings
BEARING SET, con rod, +0.040" HD
Part Number: 117590/40HD
Application: Replacement bearings
Notes: Heavy Duty
BEARING SET, con rod, +0.050"
Part Number: 117590/50
Application: Replacement bearings
BEARING SET, con rod, +0.060"
Part Number: 117590/60
Application: Replacement bearings
BEARING SET, con rod, +0.060" HD
Part Number: 117590/60HD
Application: Replacement bearings
Notes: Heavy Duty
RING GEAR, (shrink-on)
Part Number: 201454
Application: TR2-3A to (c) TS50000
RING GEAR, (bolt-on)
Part Number: 202834
Application: TR3A, TR4-4A from (c) TS50001
BOLT, ring gear retaining
Part Number: 112653
Application: TR3A, TR4-4A from (c) TS50001
TAB WASHER, ring gear bolts
Part Number: 115776
Application: TR3A, TR4-4A from (c) TS50001
TAB WASHER, flywheel bolts
Part Number: 056524
Application: TR2-3A, TR4 to (c) CT34071
BOLT, flywheel to crankshaft
Part Number: 102065
Application: TR2-3A, TR4 to (c) CT34071
BOLT, self-locking, flywheel to crankshaft
Part Number: 138527
Application: TR4-4A from (c) CT34072