DAMPER, chain
Part Number: 832-250
Application: BN7 & BT7 from 29E-H101, BJ7, BJ8
BOLT, damper to block
Part Number: GHF105
Application: BN7 & BT7 from 29E-H101, BJ7, BJ8
WASHER, plain
Part Number: WP9
Application: BN7 & BT7 from 29E-H101, BJ7, BJ8
WASHER, spring
Part Number: GHF333
Application: BN7 & BT7 from 29E-H101, BJ7, BJ8
PULLEY, crankshaft
Part Number: NPN
Application: BN4, BN6, BN7, BT7, BJ7,BJ8 to 29K/H10271
Notes: Item nos. 33-35 are not available. We suggest using replacement no. 031-206 (item 36).
DAMPER, for pulley
Part Number: NPN
Application: BN4, BN6, BN7, BT7, BJ7,BJ8 to 29K/H10271
Notes: Item nos. 33-35 are not available. We suggest using replacement no. 031-206 (item 36).
PULLEY & DAMPER, crankshaft
Part Number: NPN
Application: BJ8 from 29K/H10272
Notes: Item nos. 33-35 are not available. We suggest using replacement no. 031-206 (item 36).
PULLEY & DAMPER, crankshaft
Part Number: SC6622
Application: Fits all 100-6 & 3000 (replaces stock pulley)
Notes: A crank dampener dramatically smooths out engine vibration, significantly reducing engine wear. Many original dampeners have delaminated with age or have been damaged. These new units are produced to incredibly high race car standards.... See more
BOLT, damper to pulley
Part Number: 322-180
Application: BN4, BN6, BN7, BT7, BJ7, BJ8 to 29K/H10271
WASHER, spring
Part Number: GHF333
Application: BN4, BN6, BN7, BT7, BJ7, BJ8 to 29K/H10271
BEARING SET, crankshaft main, standard
Part Number: 8G2360STD
Notes: Tri-metal (copper/lead/tin with babbit overlay, on steel backing).
BEARING SET, crankshaft main, +0.010"
Part Number: 8G2360010
Notes: Tri-metal (copper/lead/tin with babbit overlay, on steel backing).
BEARING SET, crankshaft main, +0.020"
Part Number: 8G2360020
Notes: Tri-metal (copper/lead/tin with babbit overlay, on steel backing).
BEARING SET, crankshaft main, +0.030"
Part Number: 8G2360030
Notes: Tri-metal (copper/lead/tin with babbit overlay, on steel backing).
BEARING SET, crankshaft main, +0.040"
Part Number: 8G2360040
Notes: Tri-metal (copper/lead/tin with babbit overlay, on steel backing).
DOWEL
Part Number: 1G2984
Application: BN4, BN6, BN7 & BT7 to 29D-H254732
DOWEL
Part Number: NPN
Notes: BN7 & BT7 from 29D-H25474, BJ7 to 29F-H4878 used a quantity of 2 and BJ7 from 29F-H4879, BJ8 used 3.
CYLINDER LINER
Part Number: 021-302
Application: BN4, BN6
Notes: Cylinder liners are used to repair damaged bores. The block is bored to accept the liner, liner is pressed into block, trimmed flush with block deck, then bored and honed to fit the piston.... See more
CYLINDER LINER
Part Number: AEC879
Application: BN7, BT7, BJ7, BJ8
Notes: Cylinder liners are used to repair damaged bores. The block is bored to accept the liner, liner is pressed into block, trimmed flush with block deck, then bored and honed to fit the piston.... See more
PISTON SET, engine set, standard
Part Number: 021-266
Application: BN4 to C.E.40500 (clamp type rods; 2639cc)
PISTON SET, engine set, +0.020
Part Number: 021-267
Application: BN4 to C.E.40500 (clamp type rods; 2639cc)
PISTON SET, engine set, +0.030
Part Number: 021-268
Application: BN4 to C.E.40500 (clamp type rods; 2639cc)
PISTON SET, engine set, +0.040
Part Number: 021-269
Application: BN4 to C.E.40500 (clamp type rods; 2639cc)
PISTON SET, engine set, standard
Part Number: 021-290
Application: BN4 from C.E. 40501, BN6 (bush type rods; 2639cc)
PISTON SET, engine set, +0.020
Part Number: 021-292
Application: BN4 from C.E. 40501, BN6 (bush type rods; 2639cc)
PISTON SET, engine set, +0.030
Part Number: 021-293
Application: BN4 from C.E. 40501, BN6 (bush type rods; 2639cc)
PISTON SET, engine set, +0.040
Part Number: 021-294
Application: BN4 from C.E. 40501, BN6 (bush type rods; 2639cc)
PISTON SET, engine set, standard
Part Number: 8G2576
Application: BN7, BT7, BJ7, BJ8 (bush type rods; 2912cc)
PISTON SET, engine set, +0.020
Part Number: 8G2576/20
Application: BN7, BT7, BJ7, BJ8 (bush type rods; 2912cc)
PISTON SET, engine set, +0.030
Part Number: 8G2576/30
Application: BN7, BT7, BJ7, BJ8 (bush type rods; 2912cc)
PISTON SET, engine set, +0.040
Part Number: 8G2576/40
Application: BN7, BT7, BJ7, BJ8 (bush type rods; 2912cc)
PISTON SET, engine set, +0.060
Part Number: 8G2576/60
Application: BN7, BT7, BJ7, BJ8 (bush type rods; 2912cc)
RING SET, engine set, standard, (4 ring)
Part Number: 567-052
Application: BN4, BN6
RING SET, engine set, standard, (5 ring)
Part Number: 8G2577
Application: BN7, BT7, BJ7, BJ8
RING SET, engine set, standard, (5 ring)
Part Number: 8G2515STD
Application: BN7, BT7, BJ7, BJ8 compression rings are .078" thick
RING SET, engine set, +0.020, (5 ring)
Part Number: 8G2577/20
Application: BN7, BT7, BJ7, BJ8 compression rings are .078" thick
RING SET, engine set, +0.030, (5 ring)
Part Number: 8G2577/30
Application: BN7, BT7, BJ7, BJ8 compression rings are .078" thick
RING SET, engine set, +0.040, (5 ring)
Part Number: 8G2577/40
Application: BN7, BT7, BJ7, BJ8 compression rings are .078" thick
RING SET, engine set, +0.060, (5 ring)
Part Number: 8G2577/60
Application: BN7, BT7, BJ7, BJ8 compression rings are .078" thick
RING SET, engine set, standard, (4 ring)
Part Number: 567-180
Application: BN7, BT7, BJ7, BJ8 compression rings are .094" thick
RING SET, engine set, +0.020, (4 ring)
Part Number: 021-321
Application: BN7, BT7, BJ7, BJ8 compression rings are .094" thick
RING SET, engine set, +0.030, (4 ring)
Part Number: 021-322
Application: BN7, BT7, BJ7, BJ8 compression rings are .094" thick
RING SET, engine set, +0.040, (4 ring)
Part Number: 021-323
Application: BN7, BT7, BJ7, BJ8 compression rings are .094" thick
RING SET, engine set, +0.060, (4 ring)
Part Number: 021-324
Application: BN7, BT7, BJ7, BJ8 compression rings are .094" thick
RING SET, engine set, standard, ( 5 ring)
Part Number: 8G2522STD
Application: BN7, BT7, BJ7, BJ8 compression rings are .094" thick
RING SET, engine set, +0.020, (5 ring)
Part Number: 817-520
Application: BN7, BT7, BJ7, BJ8 compression rings are .094" thick
RING SET, engine set, +0.030, (5 ring)
Part Number: 8G2522/30
Application: BN7, BT7, BJ7, BJ8 compression rings are .094" thick
RING SET, engine set, +0.040, (5 ring)
Part Number: 817-540
Application: BN7, BT7, BJ7, BJ8 compression rings are .094" thick
RING SET, engine set, +0.060, (5 ring)
Part Number: 817-560
Application: BN7, BT7, BJ7, BJ8 compression rings are .094" thick
CONNECTING ROD, for pistons 1, 3 & 5
Part Number: 837-780
Application: BN4 to C.E.40500
CONNECTING ROD, for pistons 2, 4 & 6
Part Number: 837-790
Application: BN4 to C.E.40500
BOLT, clamping rod to gudgeon pin
Part Number: 322-200
Application: BN4 to C.E.40500
CONNECTING ROD, new
Part Number: 8G2339/10
Application: BN4 from C.E. 40501, BN6, BN7, BT7, BJ7, BJ8
CONNECTING ROD, reconditioned
Part Number: MM021-628
Application: BN4 from C.E. 40501, BN6, BN7, BT7, BJ7, BJ8
BUSH SET, connecting rod
Part Number: 829-018
Application: BN4 from C.E. 40501, BN6, BN7, BT7, BJ7, BJ8
BOLT, con rod cap
Part Number: 021-636
Application: BN4, BN6, BN7/BT7 to (e)29E-H928
BOLT, con rod cap
Part Number: 021-633
Application: BN7/BT7 from (e)29E-H929 BJ7, BJ8
BEARING SET, con rod, standard
Part Number: AJC5159STD
Notes: Tri-metal (copper/lead/tin with babbit overlay, on steel backing).
BEARING SET, con rod, +0.010
Part Number: AJC5159010
Notes: Tri-metal (copper/lead/tin with babbit overlay, on steel backing).
BEARING SET, con rod, +0.020
Part Number: AJC5159020
Notes: Tri-metal (copper/lead/tin with babbit overlay, on steel backing).
BEARING SET, con rod, +0.030
Part Number: AJC5159030
Notes: Tri-metal (copper/lead/tin with babbit overlay, on steel backing).
BEARING SET, con rod, +0.040
Part Number: AJC5159040
Notes: Tri-metal (copper/lead/tin with babbit overlay, on steel backing).
OIL PUMP, standard
Part Number: AEC692
Application: BN4, BN6, BN7 & BT7 to (e) 29D-H894 (may use later pump)
Notes: Rotor & vane type
OIL PUMP, high capacity
Part Number: 021-363
Application: BN4, BN6, BN7 & BT7 to (e) 29D-H894 (may use later pump)
Notes: Rotor & vane type
DRIVING SHAFT, with inner & outer rotors
Part Number: NPN
Application: BN4, BN6, BN7 & BT7 to (e) 29D-H894 (may use later pump)
BOLT
Part Number: NPN
Application: BN4, BN6, BN7 & BT7 to (e) 29D-H894 (may use later pump)
WASHER, spring
Part Number: GHF331
Application: BN4, BN6, BN7 & BT7 to (e) 29D-H894 (may use later pump)
OIL PUMP, standard
Part Number: AEC1341
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
Notes: Gear type
OIL PUMP, high volume
Part Number: 021-373
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
Notes: Gear type
SHAFT, driven
Part Number: 021-421
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
SHAFT, driving
Part Number: 021-426
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
GEAR, driven
Part Number: 031-214
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
Notes: Included in 836-588 gear set
GEAR, driving
Part Number: 836-580
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
Notes: Included in 836-588 gear set
GEAR SET, oil pump
Part Number: 836-588
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
KEY, driving gear
Part Number: WKN405
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
BOLT, cover to body
Part Number: NPN
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
WASHER, plain
Part Number: GHF300
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
WASHER, spring
Part Number: GHF331
Application: BN7 & BT7 from (e)29D-H895, BJ7, BJ8
SPINDLE, driving
Part Number: 031-216
Application: BN4 from C.E.38263, BN6, BN7, BT7, BJ7, BJ8
HOUSING, distributor & tach drive
Part Number: NPN
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
BOLT
Part Number: NPN
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
WASHER, spring
Part Number: GHF331
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
WASHER, plain
Part Number: GHF300
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
BOLT
Part Number: NPN
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
WASHER, spring
Part Number: GHF331
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
GEAR, driving, distributor
Part Number: 021-315
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
DRIVING DOG
Part Number: 021-339
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
EXTENSION, for drive spindle
Part Number: 021-320
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
PEG, for spindle
Part Number: 325-250
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
GEAR, driving, tachometer
Part Number: 021-330
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
PEG, for gear
Part Number: 325-250
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
PINION, tachometer
Part Number: 021-333
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
THRUST WASHER
Part Number: 1A3073
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
BUSH
Part Number: 021-334
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
GASKET
Part Number: 324-585
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
OIL SEAL, pinion
Part Number: 520-440
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
RETAINING RING
Part Number: 835-610
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
OIL SEAL, distributor
Part Number: AEC681
Application: BN4, BN6, BN7, BT7, & BJ7 to (e)29FG3562 (cars w/ mechanical tach)
DISTRIBUTOR HOUSING
Part Number: NPN
Application: BJ7 from (e)29FG3563, BJ8
BOLT
Part Number: SH604051
Application: BJ7 from (e)29FG3563, BJ8
WASHER, shakeproof
Part Number: GHF321
Application: BJ7 from (e)29FG3563, BJ8
GEAR, driving, distributor
Part Number: NPN
Application: BJ7 from (e)29FG3563, BJ8
COUPLING, distributor to gear
Part Number: NPN
Application: BJ7 from (e)29FG3563, BJ8