Evans Vintage Cool 180, 2 litre

Protect your investment and provide life time cooling!

Evans Waterless Engine Coolant is a truly unique and revolutionary engine coolant fluid formulated to improve efficiency and reduce corrosion of your car's cooling system. It neither contains water nor requires mixing with water, consequently overcoming the limitations associates with using water in engine cooling systems, such as boiling and corrosion. It is used as the only liquid in the cooling system to protect your investment and provide life time cooling. Although it does the same job as traditional water based fluids for engine cooling, regulating the temperature of the engine it should not be confused with regular antifreezes.

• No Water – No Overheating (Evans Waterless Coolants have a boiling point of 180°C and will not boil over).
• No Water – No Pressure (Allows your cooling system to run at a lower pressure, reducing the strain on engine components and reducing maintenance costs).
• No Water – No Liner Pitting (Generates significantly less pitting when compared with all water based coolants).
• No Water – No Scaling (Prevents tie build up of hard water scale that results in in efficient heat transfer).
• No Water – More BHP (Premature detonation associated with overheating, and hot spots is eliminated, optimising fuel combustion, providing more power and improving fuel economy).

Vintage Cool 180 should be used on older (pre 1945) engines that have copper, brass & bronze and more porous cast iron components – probably best suited to T Types etc.

Please Note: Evans Waterless Engine Coolants will not overcome faults in the cooling system. Please ensure your car's cooling system is in good condition, free of leaks and operating correctly. It is compatible with all electric cooling fans. Evans Waterless Coolant can be reused if drained into a clean container. Please follow the manufacturer's guidelines when using this product.

Treatment with Prep Fluid is required to ensure the cooling system is thoroughly cleaned and traces of water removed, Prep Fluid is not required when filling a new, dry, clean cooling system. It is not necessary to use the full cooling system capacity for Prep Fluid treatment; it will work with a minimum of 75% cooling system capacity. Prep Fluid can be re-used up to 3 times providing it is stored in a sealed container. Please follow the manufacturer's guidelines when using this product.