Bracket Conversion Kit, telescopic, rear, Type 1, wheel arch mounting

If your car has lever arm dampers fitted you will need to use this bracket kit to enable the fitment of telescopic shock absorbers.

For TR4A IRS models there is a choice depending on how you use the car and how you prefer the brackets to mount. These bracket kits fit at the same height as the rear tyre, check that there is adequate clearance through full suspension travel. If there is excessive negative camber present this may need to be reset.

Type 1
This is the simplest kit, the top brackets bolt to the inner wheel arch, requiring holes to be drilled. Road use only.