Your Shopping Basket

0 items in your basket.
Subtotal: £ 0.00
Proceed to Checkout
Crown Wheel & Pinion - MGB
There are two axle designs used on MGB's; the components not being interchangeable, the customer must be sure of the type on his or her vehicle. Banjo axles are fitted on roadsters up to GHN3 132923 (wire wheels), 132916 (disc wheels). Tube axles are fitted to all GT's, plus roadsters after the chassis no. change points mentioned.

The 3.9 ratio was standard fitment on the four cylinder MGB's, while the 3.07 ratio was used on MGC and V8 models. For a road going car the 3.3 ratio can be used to give a good long distance cruising ratio particularly useful for motorway work.

Our crown wheel & pinion set (Part No: BTB900A) is designed for V8 conversions, giving the correct 3.07:1 ratio for V8s but in the standard MGB tube axle case.

Part #DescriptionApplicationPriceQty
Rqd
Qty 
88G284
CROWN WHEEL & PINION, Banjo Axle
Note: Ratio 4.55:1
Sale Discounted at check out.
MGB £394.96
€470.00
1
88G283
CROWN WHEEL & PINION, Banjo Axle
Note: Ratio 4.30:1
Sale Discounted at check out.
MGB £388.96
€462.86
1
BTB653
CROWN WHEEL & PINION, Banjo Axle
Note: Ratio 3.907:1
Sale Discounted at check out.
MGB £329.96
€392.66
1
BTB856
CROWN WHEEL & PINION, Salisbury (Tube) Axle
Note: Ratio 3.907:1
Sale Discounted at check out.
MGB £329.96
€392.66
1
BTB900
CROWN WHEEL & PINION, Salisbury (Tube) Axle
Note: Ratio 3.07:1
Original V8 axles
Sale Discounted at check out.
MGB £474.95
€565.19
1
BTB900A
CROWN WHEEL & PINION, Salisbury (Tube) Axle
Note: 3.07:1
Conversion CW&P set for use in MGB tube axles only.
Sale Discounted at check out.
MGB £390.59
€464.80
1